Our Customer Service and Support Centre

-

Customer Service and Support

index


customerdownloadbusiness
customerfaqbusiness
customernewbusiness
customerhelpbusiness

DSL Setup for Windows NT via DHCP

Please note that this is the recommended setup for NT workstations and NOT recommended for fiel servers. Be sure that you have installed a Network Interface Card (NIC) and it's working properly.

  • Click on the "tart" button.
  • Click on "Settings".
  • Click on "Control Panel".
  • Double click on the "Network" icon.
  • Click on the "Protocols" tab and you will see the following screen:

If "TCP/IP Protocol" is not listed here, you will have to add it by clicking "Add" and select "TCP/IP Protocol" again. This sequence will add "TCP/IP Protocol" to the window as seen above.

Configure TCP/IP

  • Click on "TCP/IP Protocol", select "Properties" and you will see the following screen.

  • Make sure your network cadr is selected under "Adapter"
  • Select "Obtain an IP address from server".
  • Click on the "DNS" tab and you will see the following screen:

  • Make sure all fields on this window are blank. ANy values that are entered must be deleted.
  • Click "OK" and you will return to the "Network" control panel.
  • Click "OK" again.
  • Reboot your computer

You are now configured to use DSL via DHCP!

Home | Customer Service Download | Customer Service FAQ | What's New | CustService Area Help

This document maintained by Webmaster@OneNet-USA.net.
Material Copyright © 2003 One Net, Inc.